欢迎访问恒安机械网站,为您提供层流手术室净化,GMP车间净化公司,山东无尘车间的相关信息。
咨询热线:18653160053
新闻资讯 news
联系我们 CONTACT

地址:济南市槐荫区美里路丽水华庭

电话:18653160053

QQ:850206910

新闻资讯 您当前的位置:首页 - 新闻资讯 >

GMP车间净化公司如何防止颗粒污染

来源:http://www.henganjh.cn │ 发表时间:2019-07-05 

  GMP车间净化公司对洁净度有非常严格的要求,不允许出现颗粒。全面防止颗粒污染是保证车间清洁的重要措施。在这里,GMP车间净化公司详细解释了颗粒产生的原因以及如何预防。
  GMP workshop purification company has very strict requirements on cleanliness, and no particles are allowed. Comprehensive prevention of particle pollution is an important measure to ensure the cleanliness of workshop. Here, GMP Workshop Purification Company explains in detail the causes of particle formation and how to prevent it.
  一、GMP净化车间生产颗粒原因:
  1. Reasons for granule production in GMP purification workshop:
  外部通道:GMP净化车间不可能完全封闭。因此,随着人员和物料的进出,以及车间内外空气的流动,许多外部颗粒被带入无尘车间,导致车间充满颗粒。
  External access: GMP purification workshop can not be completely closed. Therefore, with the entry and exit of personnel and materials, as well as the flow of air inside and outside the workshop, many external particles are brought into the dust-free workshop, resulting in the workshop full of particles.
  内部生产:GMP净化车间的机器和设备运行时,机器与地面之间的摩擦也会产生颗粒,机器内部部件之间的摩擦也会产生颗粒。
  Internal production: When the machine and equipment in GMP purification workshop are running, the friction between the machine and the ground will also produce particles, and the friction between the internal parts of the machine will also produce particles.
GMP车间净化公司
  防止颗粒污染应遵循以下三条基本原则:
  The following three basic principles should be followed to prevent particulate pollution:
  不进入,运营商、机器和零部件在车间前应清洗处理,进入无尘车间灰尘在更衣室穿不发,不产生静电导电纤维材料特殊的无尘服装、帽子、鞋子、手套、口罩,等等,通过空气淋浴时可以删除附着在衣服上使用清洁空气粒子的表面,可以进入车间!
  Without entering, operators, machines and components should be cleaned before entering the workshop. Dust in the dustless workshop can not be worn in the dressing room. No special dust-free clothing, hats, shoes, gloves, masks with electrostatic conductive fiber materials can be produced. Surface of clean air particles attached to clothes can be removed by air shower. Enter the workshop!
  不要做:灰尘是物体运动时摩擦和接触剥离产生的,粒子是物体运动时产生的。所以在车间应尽量使用磨损和粉尘小的材料,使用粉尘小的润滑油等措施!
  Don't do it: Dust is produced by friction and contact peeling when an object is moving, and particles are produced when an object is moving. So in the workshop should try to use wear and dust small materials, use dust small lubricants and other measures!
  无储存:根据车间内部情况及时调整净化设备,清除产生的颗粒和粉尘,保持车间清洁达标!
  No storage: According to the internal situation of the workshop, timely adjust the purification equipment, remove the generated particles and dust, and keep the workshop clean up to the standard!
  以上是关于GMP车间净化公司颗粒污染防治的相关信息。我希望今天的分享对你有所帮助。如果您有更多的问题或需要,可以访问我们的官方网站http://www.henganjh.cn咨询。
  The above information is about the prevention and control of particle pollution in GMP workshop purification company. I hope today's sharing will help you. If you have more questions or needs, you can visit our official website http://www.henganjh.cn for consultation.

上一篇:山东无尘车间对电子行业范畴的奉献
下一篇:层流手术室净化设计设备