欢迎访问济南恒安净化工程网站,为您提供层流手术室净化,GMP车间净化公司,山东无尘车间的相关信息。
咨询热线:18653160053
新闻资讯 news

产品推荐

层流手术室净化生物安全柜

层流手术室净化生物安全柜

GMP车间净化传递窗

GMP车间净化传递窗

山东无尘车间FFU

山东无尘车间FFU

热门文章

线夹的类型及作用

连接器的机械性能及电气性能简要介绍

阀体的材质及主要作用是什么

模具选材需要满足的条件和原则有哪些

空气净化设备如何挑选?

如何创建更好的食品净化工程

联系我们 CONTACT

地址:济南市槐荫区美里路丽水华庭

电话:18653160053

QQ:850206910

新闻资讯 您当前的位置:首页 - 新闻资讯 >

GMP车间净化公司:恒温恒湿实验室装修要点

来源:http://www.henganjh.cn │ 发表时间:2019-06-28 

  恒温恒湿室广泛应用于棉纺、毛纺、化纤、纸张、包装、烟草生产企业以及质检、纤检等部门。在装修的过程中要按照规程严格操作,恒温恒湿室内装修要遵循以下要点。
  The constant temperature and humidity room is widely used in cotton spinning, wool spinning, chemical fibre, paper, packaging, tobacco production enterprises, quality inspection, fiber inspection and other departments. In the process of decoration, strict operation should be carried out in accordance with the regulations, and indoor decoration with constant temperature and humidity should follow the following points.
  恒温恒湿室设计和研究工作室的室内净高:当不设置空气调节时,不宜低于2.80m;设置空气调节时,不应低于2.40m。专用恒温恒湿室的室内净高应按实验仪器设备尺寸、安装及检修的要求确定。走道净高不应低于2.20m。
  The indoor net height of the design and research room of constant temperature and humidity is not less than 2.80M when air conditioning is not set, and 2.40M when air conditioning is set. The indoor net height of the special constant temperature and humidity room should be determined according to the requirements of the size, installation and maintenance of the experimental equipment. The net height of the corridor should not be less than 2.20m.
  GMP车间净化公司:恒温恒湿实验室装修要点
  GMP Workshop Purification Company: Key Points of Constant Temperature and Humidity Laboratory Decoration
  一、恒温恒湿室装修要点
  Main points of decoration of constant temperature and humidity room
  1.实验用房、走道的地面及楼梯面层,应坚实耐磨、防水防滑、不起尘、不积尘;墙面应光洁、无眩光、防潮、不起尘、不积尘;顶棚应光洁、无眩光、不起尘、不积尘。
  1. The ground and staircase floors of laboratory rooms and corridors should be solid and wear-resistant, waterproof and skid-proof, dust-proof and dust-free; the walls should be clean, glare-free, moisture-proof, dust-proof and dust-free; and the roofs should be clean, glare-free, dust-proof and dust-free.
  2.使用强酸、强碱的实验室地面应具有耐酸、碱腐蚀的性能;用水量较多的实验室地面应设地漏。
  2. The laboratory ground with strong acid and alkali should be acid-resistant and alkali-resistant, and the laboratory ground with more water consumption should be equipped with ground leakage.
  3.需要定期清洗、消毒或防尘要求高的实验室,其地面、墙面和顶棚应做整体式防水饰面。墙面与墙面之间,墙面与地面之间、墙面与顶棚之间宜做成半径不小于0.05m的半圆角。室内应减少突出的建筑构配件及明露管道,同样的,白铁通风工程设计时也应尽量减少室内不必要的突出物,力求简洁美观。
  3. Laboratories requiring regular cleaning, disinfection or dustproof should have integral waterproof finishes on their floors, walls and roofs. Between the wall and the wall, between the wall and the ground, between the wall and the ceiling should be made into a semi-circle radius of not less than 0.05m. The prominent building components and exposed pipes should be reduced in the interior. Similarly, the unnecessary prominent objects in the interior should be minimized in the design of white iron ventilation engineering, in order to be concise and beautiful.
  4.恒温恒湿室不宜设吊顶。
  4. Suspended ceiling is not suitable for constant temperature and humidity room.
  5.需设吊顶且无严格密封要求的空间,宜采用活动板块式吊顶。
  5. The movable plate ceiling should be used if there is no space required for strict sealing.
  GMP车间净化公司:恒温恒湿实验室装修要点
GMP车间净化公司
  GMP Workshop Purification Company: Key Points of Constant Temperature and Humidity Laboratory Decoration
  二、恒温恒湿室工程安装维护结构和装饰要求
  II. Installation and maintenance structure and decoration requirements of constant temperature and humidity chamber project
  1、恒温恒湿室的主实验室应该自成一区,安排在实验室的靠边角落处。用密封门限制人员的进出,把有洁净要求的房间设置在人员干扰少的地方,把辅助房间设置在外部。考虑微生物试验操作流程,把检测室与洗刷消毒室和培养室相邻,方便人流与物流的分离。为控制人员的出入(人流),只设有一个密封门进入微生物实验室主洁净区,操作人员进入物流走廊然后进入准备间,并从准备间分别经过一更、缓冲进入操作区;经过更衣、风淋、缓冲进入局部百级环境实验室。物流则由六个传递窗实现。
  1. The main laboratory of the constant temperature and humidity chamber should have its own area and be arranged in the corner near the laboratory. Sealed doors are used to restrict people's entry and exit, and rooms with cleanliness requirements are set in places where personnel interference is less, and auxiliary rooms are set outside. Considering the microbial test operation process, the test room is adjacent to the washing and disinfection room and the culture room, which facilitates the separation of flow and logistics. In order to control the entry and exit of personnel (flow of people), only one sealed door enters the main clean area of microbiological laboratory. Operators enter the logistics corridor and then enter the preparation room. They enter the operation area through one change and buffer respectively from the preparation room. After changing clothes, air shower and buffer, they enter the local 100-level environmental laboratory. Logistics is realized by six transfer windows.
  2、恒温恒湿室整个平面规划彻底可以满足国家关联标准及试验室运用的需求,充分利用了空间,依照试验操作流程装备了各种功用的房间,操作线路方便快捷。
  2. The whole plan of the constant temperature and humidity room can completely meet the requirements of the relevant national standards and laboratory application, make full use of the space, equip the rooms with various functions according to the test operation process, and the operation line is convenient and fast.
  3、恒温恒湿室主题框架为彩钢板玻璃间隔,色彩为哑白色。此外,冷藏冷库工程安装时隔板也多数采用彩钢板,但与恒温恒湿室规格不尽相同,恒温恒湿室间隔一般玻璃厚度为8MM,为避免堆积尘埃,窗料运用R25MM铝合金圆弧压线;一切二维衔接处的内侧均运用R50MM铝合金内圆角,露出在外的二维衔接线的外侧则用R100MM铝合金外角衔接;彩钢板的三维衔接处运用三维接点过度,而彩钢板与墙角地上则用铝合金槽衔接。吊顶资料亦为彩钢板。微生物检测室地上为环氧树脂资料,具有无缝隙、耐腐蚀、平坦、简单清洁的特征。地上地脚线用阴角铝材装潢,漂亮且严密性好。整个恒温恒湿室经过科学描绘,精心施工,使试验室内构成巩固、无缝、滑润、漂亮、不反光、不积尘、不生锈、防潮、抗菌、功能优秀的无菌外表和内壳。
  3. The theme frame of constant temperature and humidity room is stained steel plate and glass spacer, and the color is dumb white. In addition, color steel plates are mostly used in the installation of cold storage projects, but the specifications are different from those of constant temperature and humidity chambers. The thickness of glass in constant temperature and humidity chambers is 8MM. In order to avoid dust accumulation, R25MM aluminium alloy arc pressing line is used for window materials; R50MM aluminium alloy inner corner is used in all two-dimensional joints to expose outside. The outer side of the two-dimensional connection is connected with the outer corner of R100MM aluminium alloy; the three-dimensional connection of the color steel plate is excessively used, while the color steel plate is connected with the aluminium alloy groove on the corner floor. The ceiling information is also coloured steel plate. The microbial testing room is made of epoxy resin, which is seamless, corrosion-resistant, flat, simple and clean. The ground and ground baselines are decorated with shade aluminium, which is beautiful and compact. The whole constant temperature and humidity room is scientifically depicted and carefully constructed to make the laboratory a solid, seamless, smooth, beautiful, non-reflective, dust-free, rust-free, moisture-proof, anti-bacterial and functional aseptic outer and inner shell.
  以上是GMP车间净化公司为大家整理的相关内容,想要了解更多,欢迎访问我们网站:http://www.henganjh.cn
  The above is the related content of GMP workshop purification company for you. For more information, please visit our website: http://www.henganjh.cn.

上一篇:山东无尘车间必须用臭氧消毒灭菌吗?
下一篇:手术室净化层流罩应该怎样选择呢