欢迎访问济南恒安净化工程网站,为您提供层流手术室净化,GMP车间净化公司,山东无尘车间的相关信息。
咨询热线:18653160053
新闻资讯 news

产品推荐

层流手术室净化生物安全柜

层流手术室净化生物安全柜

GMP车间净化传递窗

GMP车间净化传递窗

山东无尘车间FFU

山东无尘车间FFU

热门文章

线夹的类型及作用

连接器的机械性能及电气性能简要介绍

阀体的材质及主要作用是什么

模具选材需要满足的条件和原则有哪些

空气净化设备如何挑选?

如何创建更好的食品净化工程

联系我们 CONTACT

地址:济南市槐荫区美里路丽水华庭

电话:18653160053

QQ:850206910

新闻资讯 您当前的位置:首页 - 新闻资讯 >

山东无尘车间干净度的测试办法

来源:http://www.henganjh.cn │ 发表时间:2019-06-11 

  山东无尘车间干净度的测试办法
  Test Method for Cleanness of Dust-free Workshop in Shandong Province
  在山东无尘车间的施工完成后,为了证明达标,普通都需求对无尘车间中的干净度停止测试。干净度是指空气环境中空气所含尘埃量几的水平。在普通的状况下,是指单位体积的空气中所含大于等于某一粒径粒子的数量。含尘量高则干净度低,含尘量低则干净度高。由此可见,干净度的测试在无尘车间显得有多重要。那么你晓得无尘车间干净度的测试办法是怎样的吗?下面盛发制冷技术人员为您引见:
  After the completion of the construction of the dust-free workshop in Shandong Province, in order to prove that it meets the standards, it is generally necessary to stop testing the cleanliness of the dust-free workshop. Cleanness refers to the level of dust in the air. In general, it refers to the number of particles in the air per unit volume that is larger than or equal to a certain particle size. High dust content leads to low cleanliness, while low dust content leads to high cleanliness. It can be seen that the cleanliness test in the dust-free workshop is very important. Do you know how to test the cleanliness of the dust-free workshop? Here are some refrigeration technicians from Shengfa.
                        山东无尘车间
  山东无尘车间
  Shandong Dustless Workshop
  无尘车间干净度的测试办法:
  Test method for cleanliness of dust-free workshop:
  无尘车间干净度的测试普通应分为空态条件下测试、动态条件下测试、静态条件下测试等三种办法来停止分别测试干净室内粉尘的含量。
  The cleanliness test of dust-free workshop should be divided into three methods: empty condition test, dynamic condition test and static condition test to stop testing the content of clean indoor dust separately.
  1、空态条件下测试
  1. Testing under empty condition
  是指无尘车间系统已处于正常运转状态,但工艺设备、消费人员还未进入状况下测试的。
  It means that the dust-free workshop system has been in normal operation, but the process equipment and consumers have not yet entered the condition of testing.
  2、动态条件下测试
  2. Testing under Dynamic Conditions
  是指无尘车间系统已处于正常运转状态,工艺设备、消费人员都已工作的状况下停止测试的。
  Dust-free workshop system has been in normal operation, process equipment, consumers have been working conditions to stop testing.
  2、静态条件下测试
  2. Testing under Static Conditions
  是指无尘车间系统已处于正常运转状态,工艺设备曾经装置完成但未运转,室内没有消费人员的状况下停止测试的。
  Dust-free workshop system has been in normal operation, process equipment has been completed but not running, indoor no consumer conditions to stop testing.
  以上所引见的内容就是山东无尘车间干净度的测试办法。值得留意的是,在普通状况下,无尘车间空气干净度的测试办法关于粒径大于或等于0.5微米的尘粒计数,宜采用光散射粒子计数法。关于粒径大于或等于5微米的尘粒计数也可采用滤膜显微镜计数法。
  The content introduced above is the cleanliness test method of Shandong dust-free workshop. It is worth noting that under normal conditions, the method of measuring air cleanliness in dust-free workshops should adopt light scattering particle counting method when the particle size is greater than or equal to 0.5 micron. The method of counting dust particles with particle size greater than or equal to 5 microns can also be used by filter microscope.

上一篇:层流手术室净化前有哪些准备工作
下一篇:GMP车间净化公司施工时应使用什么材料