欢迎访问恒安机械网站,为您提供层流手术室净化,GMP车间净化公司,山东无尘车间的相关信息。
咨询热线:18653160053
新闻资讯 news
联系我们 CONTACT

地址:济南市槐荫区美里路丽水华庭

电话:18653160053

QQ:850206910

新闻资讯 您当前的位置:首页 - 新闻资讯 >

山东无尘车间怎么设计才能做到彻底“无尘”!

来源:http://www.henganjh.cn │ 发表时间:2019-05-31 

  在很多行业都会应用到无尘车间,尤其是现在的热精密电子行业和制药制造业,对无尘车间的要求更加严格。
  In many industries will be applied to dust-free workshop, especially in the thermal precision electronics industry and pharmaceutical manufacturing industry, the requirements of dust-free workshop are more stringent.
  因为山东无尘车间不仅能保证员工的健康,而且对产品的质量、精度、成品率、稳定性等都有显著的影响。下面我针对无尘车间装修施工要求及注意事项为您简要介绍一下,希望对您有所帮助!
  Because dust-free workshop can not only ensure the health of employees, but also have a significant impact on product quality, accuracy, yield, stability and so on. Next, I will give you a brief introduction of the requirements and precautions for the decoration and construction of dust-free workshop, hoping to help you!
  无尘车间装修需要注意什么?无尘车间装修是一个非常技术化的行业,无尘车间不像我们普通的房间,它需要有很高的洁净度,有些地方还需要有除尘、防火、保温、防静电的要求。
  Dust-free workshop decoration needs attention? Dust-free workshop decoration is a very technical industry, unlike our ordinary rooms, dust-free workshop needs a high degree of cleanliness, and some places also need dust removal, fire prevention, thermal insulation, anti-static requirements.
  因此,对无尘车间的装修会有非常深刻的行业认识,而且对无尘车间的装修材料也需要有非常深刻的认识,从而达到真正意义上的“无尘”。
  Therefore, the decoration of dust-free workshop will have a very profound understanding of the industry, and the decoration materials of dust-free workshop also need a very profound understanding, so as to achieve a true sense of "dust-free".
  如何选择装修材料
  How to Choose Decoration Materials
              山东无尘车间
  必须使用防水石膏板。
  Waterproof gypsum board must be used.
  二是木材含水率不超过16%,或易开裂、变形、疏松等。
  Second, wood moisture content is not more than 16%, or easy to crack, deformation, loose and so on.
  三、装饰材料表面具有一定的耐化学性。
  3. The surface of decorative materials has certain chemical resistance.
  四、装饰材料具有一定的抗氧化性。
  4. Decorative materials have certain antioxidant properties.
  五、淋浴区,比较好选用具有防滑功能的瓷砖。
  Fifth, in the shower area, it is better to choose Tile with anti-skid function.
  六、抗菌墙塑,使用寿命短,易变形、鼓形、装饰类低而窄。
  6. Antibacterial wall plastics, short service life, easy to deform, drum-shaped, decorative low and narrow.
  无尘车间装饰板:装饰板,俗称装饰板。这是额外收费。
  Dustless workshop decorative board: decorative board, commonly known as decorative board. This is an extra charge.
                  山东无尘车间
  无尘车间施工要求
  Construction Requirements for Dust-free WorkshopConstruction Requirements for Dust-free Workshop1. 自流平地面处理,厚度为2mm。
  1. Self-leveling ground treatment, thickness of 2 mm.
  2. 根据GMP要求,焊缝应密封。
  2. According to GMP requirements, welds should be sealed.
  3.所有附件均与主体结构连接,防止松动和灰尘脱落。
  3. All accessories are connected with the main structure to prevent loosening and dust falling off.
  4、缝隙应封在前面。
  4. Gaps should be sealed in front.
  5. 按照GMP认证检验标准,满足以下要求:
  5. According to GMP certification and inspection standards, the following requirements are met:
  A.选择变形小的材料。
  A. Select materials with small deformation.
  墙壁和天花板应光滑易清洁。色彩和谐,易于识别污染物。
  The walls and ceilings should be smooth and clean. Harmonious color, easy to identify pollutants.
  C.每个连接处的缝隙应密封。
  C. The gap at each joint should be sealed.
  6、操作过程中的粉尘量必须随时清理。
  6. The amount of dust during operation must be cleaned up at any time.
  7. 有过滤器的房间不应进行除尘操作。
  7. The room with filter should not be dusted.
  8. 保护工作表面,避免板材缺陷。
  8. Protect the working surface and avoid plate defects.
  山东无尘车间施工注意事项
  Matters needing attention in construction of dust-free workshopMatters needing attention in construction of dust-free workshop1. 板材在铺设粘贴前应进行分类。
  1. Plates should be classified before they are laid and pasted.
  2. 固定前清除杂质,保持表面干燥。
  2. Remove impurities and keep the surface dry before fixing.
  3.设备入口应随时关闭,防止杂物进入。
  3. Equipment entrance should be closed at any time to prevent debris from entering.
  4. 施工现场应保证良好的通风和照明。
  4. Good ventilation and lighting should be ensured at the construction site.
 

上一篇:层流手术室净化技术及相关知识
下一篇:GMP净化车间的标准