欢迎访问济南恒安净化工程网站,为您提供层流手术室净化,GMP车间净化公司,山东无尘车间的相关信息。
咨询热线:18653160053
新闻资讯 news

产品推荐

层流手术室净化生物安全柜

层流手术室净化生物安全柜

GMP车间净化传递窗

GMP车间净化传递窗

山东无尘车间FFU

山东无尘车间FFU

热门文章

线夹的类型及作用

连接器的机械性能及电气性能简要介绍

阀体的材质及主要作用是什么

模具选材需要满足的条件和原则有哪些

空气净化设备如何挑选?

如何创建更好的食品净化工程

联系我们 CONTACT

地址:济南市槐荫区美里路丽水华庭

电话:18653160053

QQ:850206910

新闻资讯 您当前的位置:首页 - 新闻资讯 >

装修无尘车间结构有哪些要求?

来源:http://www.henganjh.cn │ 发表时间:2020-07-15 

  大部分厂家装修无尘车间的目的,都是为了给工作人员一个更舒适环境,从而提高产品质量以及效率。但无尘车间装修比一般的厂房要求要复杂得多,如果想要无尘车间装修的合理,我们首先要了解:装修无尘车间结构有哪些要求?下面山东无尘车间就带大家一起来了解下吧。
  Most manufacturers decorate dust-free workshops for the purpose of providing staff with a more comfortable environment, so as to improve product quality and efficiency. However, the decoration of dust-free workshop is much more complicated than the general workshop requirements. If we want the decoration of dust-free workshop reasonable, we should first understand: what are the requirements for the structure of dust-free workshop? Next, Shandong dust-free workshop will take you to understand it.
  装修无尘车间结构要求:
  Structural requirements for decoration dust-free workshop:
  1、无尘车间可以看作为一个独立的空间,想象位于外界几乎断绝联系而又并非彻底断绝,那么外围的环形走廊就成为了无尘车间与外界联系的缓冲地带,能够的减少外界带来的污染。车间内窗户相对于墙面齐平,绝对不能设置窗台。
  1. Dust free workshop can be seen as an independent space. Imagine that it is almost disconnected from the outside world, but not completely cut off. Then the peripheral circular corridor becomes the buffer zone between the dust-free workshop and the outside world, which can minimize the pollution caused by the outside world. The windows in the workshop shall be flush with the wall, and the windowsill shall not be set.
  2、洁净厂房的门窗宜用金属或金属涂塑材料,不得使用木门窗,以免长期受潮长菌。
  2. The doors and windows of clean workshop should be made of metal or metal coated plastic materials, and wooden doors and windows should not be used to avoid long-term damp and bacteria growth.
                                                山东无尘车间
  3、外墙上的窗宜与内墙面平整,窗台呈斜角或不留窗台,且为双层固定窗以减少能量损失。
  3. The windows on the outer wall should be flat with the inner wall, and the windowsill should be inclined or no sill should be left, and the double-layer fixed window should be used to reduce energy loss.
  4、外窗的层数设置和结构形式要充分考虑对空气水分的密封,使污染粒子不易从外部渗入。有时候室内外温差过大容易产生结露,为了避免这种情况室内门窗缝隙必须要密封。
  4. The air moisture sealing should be fully considered in the layer setting and structural form of the external window, so that the pollution particles are not easy to penetrate from the outside. Sometimes the temperature difference between indoor and outdoor is too large, which is easy to produce condensation. In order to avoid this situation, the gap between doors and windows must be sealed.
  5、门窗材料应选择耐侯性好,自然变形小,制造误差小,气密性好的,造型要简单,不易积尘,便于清扫,门框不设门槛。
  5. Door and window materials should be selected with good weather resistance, small natural deformation, small manufacturing error, good air tightness, simple modeling, not easy to accumulate dust, easy to clean, door frame without threshold.
  值得注意的是,确认好装修无尘车间结构要求后,在准备装修无尘车间时,要对无尘车间进行分析人车路径、配管系统、排气管道、原料搬运和作业的流程等,尽量缩短动线,并避免交叉,以防止交叉污染。无尘车间四周,宜设缓冲区;制造装置的出入,不要对作业产生大影响。
  It is worth noting that after confirming the structural requirements of the decoration dust-free workshop, when preparing to decorate the dust-free workshop, it is necessary to analyze the personnel vehicle path, piping system, exhaust pipe, raw material handling and operation process of the dust-free workshop, so as to shorten the moving line as far as possible and avoid cross contamination. A buffer zone should be set up around the dust-free workshop; the access of manufacturing devices should not have a great impact on the operation.
  以上是关于对装修无尘车间结构的要求,相信大家都了解了,想要了解更多内容欢迎点击山东无尘车间http://www.henganjh.cn网站。
  The above is about the decoration dust-free workshop structure requirements, I believe you all understand, want to know more content, welcome to click Shandong dust-free workshop http://www.henganjh.cn Website.

上一篇:层流手术室净化在生活中有哪些应用?
下一篇:食品净化车间产生的废气如何处理?