欢迎访问恒安机械网站,为您提供层流手术室净化,GMP车间净化公司,山东无尘车间的相关信息。
咨询热线:18653160053
新闻资讯 news
联系我们 CONTACT

地址:济南市槐荫区美里路丽水华庭

电话:18653160053

QQ:850206910

新闻资讯 您当前的位置:首页 - 新闻资讯 >

GMP车间净化的意义都有哪些?

来源:http://www.henganjh.cn │ 发表时间:2019-12-31 

无尘车间是一个技术性很强的行业。无尘车间不同于普通车间。他需要一定程度的清洁,需要灰尘、火、热和静电的要求。GMP净化车间与热精密电子、制药行业一样,对无尘车间的要求更加严格。
  Dust free workshop is a highly technical industry. Dust free workshop is different from ordinary workshop. He needs a certain degree of cleaning. He needs dust, fire, heat and static electricity. GMP purification workshop, like thermal precision electronics and pharmaceutical industry, has more strict requirements for dust-free workshop.
  无尘车间的改造不仅需要对行业有深入的了解,更需要对无尘车间所使用的材料有相应的深入了解,从而实现真正的“无尘”。
  The transformation of the dust-free workshop not only needs to have a deep understanding of the industry, but also needs to have a corresponding in-depth understanding of the materials used in the dust-free workshop, so as to realize the real "dust-free".
GMP车间净化公司
  一、装饰材料
  1、 Decorative materials
  1. 必须使用防水石膏板。
  1. Waterproof gypsum board must be used.
  2、木材含水率不超过16%,清洁车间费用或易干燥、变形、疏松等。
  2. The moisture content of wood is not more than 16%. The cost of cleaning workshop is easy to dry, deform and loosen.
  3.装饰材料表面具有一定的耐化学性。
  3. The surface of decorative materials has certain chemical resistance.
  4. 装饰材料具有一定的抗氧化性能。
  4. Decorative materials have certain oxidation resistance.
  淋浴区,更好使用具有防滑功能的瓷砖。
  For shower area, it is better to use tile with antiskid function.
  6、抗菌墙塑,使用寿命短,易变形,滚轮,装饰等级低。
  6. Antibacterial wall plastic, short service life, easy to deform, roller, low decoration level.
  7、洁净室装饰板:装饰板,俗称装饰板。这是额外收费。
  7. Clean room decorative board: decorative board, commonly known as decorative board. This is an extra charge.
  二世。施工要求
  II. Construction requirements
  1. 洁净洁净车间自流平地面处理,厚度2mm。
  1. Self leveling ground treatment of clean workshop, with thickness of 2mm.
  2. 间隙部分按GMP要求密封。
  2. The gap part shall be sealed according to GMP requirements.
  3.所有附件均与主体结构连接,防止松动和除尘。
  3. All accessories are connected with the main structure to prevent looseness and dust removal.
  4. 这个缺口应该在前面封上。
  4. The gap should be sealed at the front.
  5. 按照GMP认证检验标准,满足以下要求:
  5. Meet the following requirements according to GMP certification and inspection standards:
  (1).使用变形小的材料。
  (1) . use materials with small deformation.
  (2).墙壁和天花板应光滑易清洁。色彩应协调,便于识别污染物。
  (2) . walls and ceilings shall be smooth and easy to clean. The color shall be coordinated to facilitate the identification of pollutants.
  (3).各接头间隙应密封。
  (3) . each joint clearance shall be sealed.
  6. 操作过程中产生的粉尘必须随时清理。
  6. Dust generated during operation must be cleaned at any time.
  7. 这个房间装有滤网,所以不允许有灰尘的工作。
  7. This room is equipped with filter screen, so dust is not allowed to work.
  8. 保护工作表面,避免板缺陷。
  8. Protect the working surface from plate defects.
  三、注意事项
  3、 Precautions
  在设立董事会之前,应先进行分类。
  Before the establishment of the board of directors, it should be classified.
  2. 插入前清除杂质并保持表面干燥。
  2. Remove impurities and keep the surface dry before inserting.
  3.设备的进口应随时关闭,以防杂物进入。
  3. The inlet of the equipment shall be closed at any time to prevent sundries from entering.
  4. 施工现场应保证良好的通风和照明。
  4. Good ventilation and lighting shall be ensured at the construction site.
  以上就是GMP车间净化公司对净化意义的详细介绍,想要了解更多产品信息欢迎访问官网http://www.henganjh.cn
  The above is the detailed introduction of GMP workshop purification company to purification significance. For more product information, please visit the official website http://www.henganjh.cn

上一篇:无尘车间环氧地面水泡解决措施都有哪些?
下一篇:层流手术室内那些事净化的?